Infokey Segway i2 and x2 not registered

SKU: 80001
GTIN: 4251445420441
HAN: 4251445420441
Category: Infokey & Accessories
Manufacturers: Segway Europe B.V.

Infokey Controller (key) unprogrammed for Segway PT i2 / x2

This electronic key is not yet programmed on a specific Segway

We will gladly arrange the programming for you.

€ 329,00

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs

Infokey Segway i2 and x2 not registered

The Infokey is the key to start and drive your Segway PT.
The Infokey must be programmed to the specific Segway PT.

The Infokey Controller offered here is a new Infokey without programming to your specific vehicle. This means that after purchasing this key, it must still be set (programmed) for a specific vehicle.

The Segway PT InfoKey - WITHOUT programming

The Infokey also performs a controller function. For this purpose, the Info Key has a display from which information such as battery status, kilometre display, etc. can be read.
The maximum speed, the turtle mode and much more can also be set via key combinations.

Why a second segway infokey is so important!

Without Infokey the Segway PT cannot be started anymore. This means that if your Infokey is lost or broken, your vehicle will be without function until you receive a replacement key. However, the infokey must first be ordered from Segway Inc. This will take time. For this reason you should always have a second key ready, i.e. a spare key.

Of course we will repair your Infokey for you!

Product safety information

Manufacturer information:

Segway Europe B.V.
Dynamostraat 7
Amsterdam, Niederlande, 1014 BN
support-de@shop.segway.com
https://shop.segway.com

Condition:	New
Suitable for:	i2 Gen2 x2 Gen2 i2 SE x2 SE all Segway PT Electric wheelchair AddSeat Bi-Go Genny Freee Omeo Apache My Frankie Mobility Cube
Shipping weight:	0,05 kg
Item weight:	0,04 kg
Dimensions ( Length × Width × Height ):	5,50 × 5,50 × 2,00 cm

Important warning! Risk of injury!

General:

When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
Special care must be taken while handling with electricity.
When driving on the road, always observe the locally valid laws and regulations!
Ensure that you wear adequate protective clothing
If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!

Mounting:

Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
Remove both batteries / accumulators before starting work.
PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
Always read the latest authorized operating and installation instructions before installation
In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation

Driving the vehicle:

Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
PT Pro recommends that you always wear a helmet when driving the vehicle.
When using the vehicle, the current road traffic regulations in the respective country must be observed
Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
Protect batteries and their connectors from moisture
Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
Remove both batteries / accumulators before starting work
Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!

Lamps:

Please always ensure sufficient battery power for the duration of your ride.
Never look directly into the light source. This can lead to blindness

Rims:

Important: Risk of crashing:
Check rims for damage before every ride!
Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
Regularly check the screw connection of the rims!
Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.

Helmets:

Caution: Not suitable for motorcycling!
Please read the warnings inside the helmet!
Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.

Caution:
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.