Pimp your Segway x2 - PT Pro fenders in strong colours
Suitable for:
Segway x2 Segway x2/Gen2 Segway x2/SE
The fender kit for the x2 serves as a mudguard or tire cover. The fender protects against injuries caused by contact with the spinning tyres as well as against rain, wetness and whirled up stones.
The PT Pro x2 fender is made of high quality plastic and is available not only in the standard colour white, but also in white, red and green. The fender with the robust fender design is the easy and affordable way to make your Segway x2 an absolute eye-catcher.
Bring color to your fleet, either just for you or as a guide vehicle. So the tour guide will not be overlooked anymore. Good looks and attention are the best advertising for your touring business. Whether at events or city tours, with the PT Pro fenders for the x2 you have the looks on your side. The relatively large flat area on the fender, on which the PT Pro logo is attached, is also perfect for attaching your own advertising or logos!!
Complete the transformation with our colorful Fascias Gen2 or SE
The fenders are of course also available in the inexpensive SET or as a set for conversion from i2 to x2 .
Of course the fenders also protect against stones and dirt.
Suitable for the PT Pro x2 lower cargo frame and also compatible with the original x2 lower cargo frame.
Unlike the Segway i2, the rightside and leftside fenders of the Segway x2 are different and can therefore be ordered separately.
Starting point is the stand ON the Segway PT in the direction of travel!
Side: Left
Colour: white
| Condition: |
New |
| Color: |
white |
| Suitable for: |
x2 Gen2x2 SE |
| Shipping weight: |
0,56 kg
|
| Item weight: |
0,54 kg
|
| Dimensions
( Length × Width × Height ):
|
42,00 × 30,00 × 13,00 cm |
Important warning! Risk of injury!
General:
- When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
- Special care must be taken while handling with electricity.
- When driving on the road, always observe the locally valid laws and regulations!
- Ensure that you wear adequate protective clothing
- If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!
Mounting:
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work.
- PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
- Always read the latest authorized operating and installation instructions before installation
- In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
- To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation
Driving the vehicle:
- Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
- To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
- PT Pro recommends that you always wear a helmet when driving the vehicle.
- When using the vehicle, the current road traffic regulations in the respective country must be observed
- Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
- Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
- Protect batteries and their connectors from moisture
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work
- Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!
Lamps:
- Please always ensure sufficient battery power for the duration of your ride.
- Never look directly into the light source. This can lead to blindness
Rims:
- Important: Risk of crashing:
- Check rims for damage before every ride!
- Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
- Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
- Regularly check the screw connection of the rims!
- Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.
Helmets:
- Caution: Not suitable for motorcycling!
- Please read the warnings inside the helmet!
- Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
- The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
- Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.
Caution:
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.
There are no reviews yet.
