Engine new for Segway PT

Item number: 50001

The new electric engine of the Segway PT, suitable for models i2, x2, SE and Gen2

Suitable for:
Segway Gen2/i2/x2 Segway SE/i2/x2

Power and reliability combined. The service free electric drive as a spare part for replacement on your Segway PT.

Category: Electronic Components


€ 773,50

including 19% VAT. , plus shipping (Paketdienst)

Available now!

Shipping time: 1 - 3 workdays

pcs


Segway PT E - Motor New -

to replace a defective engine (Electric Power Engine) in the Segway PT Base. Every Segway PT has two of these engines. These are installed in the Base. On the outside of the Base are the gears (Gearbox).

Suitable for:
Segway Gen2/i2/x2 Segway SE/i2/x2

Failure of the electric motor is rare, since its main characteristics are low wear and maintenance-free. Unfortunately, the Segway PT's propulsion system is also a mechanical spare part and therefore sometimes fails. So it is good to be able to buy this spare part at PT Pro individually for a reasonable price.

To repair the electric drive (e.g. rewinding) is often too much effort, so it is easier to order the Segway PT electric motor online at PT Pro. The installation of the new motor should then also bring peace for a long time. The price comparison with a used motor (also available online at PT Pro!) may make sense for older or little used standing scooters. We will be happy to advise you how you can get a cheap replacement engine.

Whether you can install the engine is the question, how your workshop is equipped and whether you have the necessary expertise for this. The engine is the power plant and therefore an essential component of the Segway PT. It is also decisive for your driving safety.

We advise you to have this repair done in a specialized workshop. PT Pro makes you a good and favorable offer for the installation of the e-motor. Please play it safe in this area!

Caution!

Safety relevant spare part! Installation only by qualified personnel!

Attention!
Electronic components are generally excluded from return, revocation and exchange, as these are specific one-off productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.

Please note our extra warnings!


Condition: New
Suitable for: i2 Gen2 x2 Gen2 i2 SE x2 SE all Segway PT
Shipping weight:1,49 Kg
Product weight: 1,47 Kg
Dimensions ( length × width × height ): 14,00 × 8,00 × 8,00 cm

Important warning! Risk of injury!

General:

  • When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
  • Special care must be taken while handling with electricity.
  • When driving on the road, always observe the locally valid laws and regulations!
  • Ensure that you wear adequate protective clothing
  • If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!

Mounting:

  • Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
  • Remove both batteries / accumulators before starting work.
  • PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
  • Always read the latest authorized operating and installation instructions before installation
  • In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
  • To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation

Driving the vehicle:

  • Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
  • To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
  • PT Pro recommends that you always wear a helmet when driving the vehicle.
  • When using the vehicle, the current road traffic regulations in the respective country must be observed
  • Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
  • Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
  • Protect batteries and their connectors from moisture
  • Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
  • Remove both batteries / accumulators before starting work
  • Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!

Lamps:

  • Please always ensure sufficient battery power for the duration of your ride.
  • Never look directly into the light source. This can lead to blindness

Rims:

  • Important: Risk of crashing:
  • Check rims for damage before every ride!
  • Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
  • Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
  • Regularly check the screw connection of the rims!
  • Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.

Helmets:

  • Caution: Not suitable for motorcycling!
  • Please read the warnings inside the helmet!
  • Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
  • The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
  • Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.


Caution: 
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.

Average product review

Write your first review and help others with their purchase decision:


Contact

Shop, event and technical hotline

+49 9621 9141950

PT Pro Tours booking hotline

+49 176 84072221

PT Pro Mail

PT Pro on Facebook
Discover & Contact

PT Pro Service Center Bavaria
Feldbauerstraße 5a
92224 Amberg
> Show in Google Maps

Unsere Standorte


Discover our tours here!