Kick stand PT Pro height adjustable Segway SE

Kick stand PT Pro height adjustable Segway SE

(1 Reviews)

SKU: 80904
GTIN: 4251445403260
Category: Parking Stand
Manufacturers:

€ 32,90

incl. 19% VAT , plus (Paketdienst)

Choose tax zone / country of delivery

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

pcs

Height adjustable kick stand for Segway SE

Suitable for:
Segway SE Segway SE/i2 Segway SE/x2

The rugged PT Pro parking stand for all Segway i2, x2, Gen2. This article is also available under article number 80903 as parking stand Segway Gen2.
The sturdy Segway stand ensures stability on your Segway PT. The leg can be adjusted in length and thus used for both the x2 and the i2. The assembly is very easy via two screws through the screw holes in the fascia power base trim.
The stand is very easy to operate because the operating principle every user is known from the bike . In addition, the favorable Kickstand is characterized by its very good price-performance ratio and is therefore also for large Segway fleets cost-effective to purchase. Also very easy to maintain, because the replacement in case of damage does not require a complicated assembly.
Simple but good! Steplessly adjustable in height. And the Segway PT is finally very stable. The park stand is excellently suited for Segway x2 and x2 Race. Attention! With the Segway i2, front-mounted makes it difficult to transport the Segway i2 via steps (step function).

For users who often have to pull their Segway i2 over high steps, we advise against this stand solution.

Assembly instructions for the Segway PT park stand front (foldable)

Suitable for model:

Segway SE / i2 / x2

Required number of pieces per component:

1 stand

Required tools:

Allen
Easy construction

Delivery:

Parking stand with required small parts

Particularities:

Good for touring, as the handling is self-explanatory

Please pay attention to our warnings!

Suitable for:	i2 SE x2 SE
Shipping weight:	0,31 kg
Item weight:	0,30 kg
Dimensions ( Length × Width × Height ):	30,00 × 10,00 × 3,00 cm

Important warning! Risk of injury!

General:

When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
Special care must be taken while handling with electricity.
When driving on the road, always observe the locally valid laws and regulations!
Ensure that you wear adequate protective clothing
If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!

Mounting:

Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
Remove both batteries / accumulators before starting work.
PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
Always read the latest authorized operating and installation instructions before installation
In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation

Driving the vehicle:

Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
PT Pro recommends that you always wear a helmet when driving the vehicle.
When using the vehicle, the current road traffic regulations in the respective country must be observed
Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
Protect batteries and their connectors from moisture
Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
Remove both batteries / accumulators before starting work
Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!

Lamps:

Please always ensure sufficient battery power for the duration of your ride.
Never look directly into the light source. This can lead to blindness

Rims:

Important: Risk of crashing:
Check rims for damage before every ride!
Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
Regularly check the screw connection of the rims!
Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.

Helmets:

Caution: Not suitable for motorcycling!
Please read the warnings inside the helmet!
Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.

Caution:
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.

Average item rating