Weber Drawbar Connection for bicycle trailers or Segway PT trailers
Suitable for:
Segway Gen2/i2/x2 Segway SE/i2/x2
Weber's drawbar connection is a TOP product. Highest quality and safety for your bicycle or cargo trailer.
For the conversion of your trailer to a Weber coupling you need the right drawbar connection.
Measure with a caliper the EXTERNAL DIAMETER or the INTERNAL DIAMETER of the drawbar of your existing trailer, we will deliver you the suitable connection including lock. For this please specify the data of the pipe diameter when ordering!
For assembly, you need 2 fork and / or ring spanner with the key width 10 mm. In some cases, a drill, drills with a diameter of 6 mm and 3.2 mm and a hacksaw or pipe cutter.
When assembling with untrained people. Risk of injury! We recommend to have the assembly carried out only by trained specialist staff! We point out to all dealers and end users that you are responsible for the entire system of bicycle trailers and their correct function in terms of product liability!
On the bicycle StVZO approved for retrofitting of this approved taillight on the bike.
Caution: Segways PT / Ninebot may not be moved according to German StVO with trailers in traffic. The trailer offered by us may only be used on the bicycle in traffic.
The frame bracket is suitable for attaching a trailer coupling for kidds caddies, bike trailers, transport trailers and many other trailers. Attention! Standard bicycle trailers do not do justice to the Segway PT and can not be fitted to the Segway without adjustments.
If you already have a trailer or you don´t like our trailers we can adapt your trailer to the Segway PT. Please contact us.
Attention: For Segway PT not StVZO compliant
Suitable for model:
- All Segway PT models for attaching the Weber trailer drawbar to the Segway PT
Required number of pieces per component:
- 1 frame mount Art. 81010
- 1 coupling joint Weber Art. 81011
- possibly Weber drawbar connection lockable Art. 81012 (this article!)
- Trailer Rebuilt for Segway PT !!! Child Trailer Art. 81017, Tipping Trailer Art. 81016, Transport Trailer Art. 81018
Required tools:
- For assembly, you need 2 fork and / or ring spanner with the key width 10 mm. In some cases, a drill, drills with a diameter of 6 mm and 3.2 mm and a hacksaw or pipe cutter
- If you choose a PT Pro trailer, mounting is easy
Delivery:
- 1 drawbar connection diameter 25 mm, 1 pole base, 1 tether, 1 screw with self-locking nut, 2 keys for the security lock instruction label, installation instructions
Particularities:
- specially made for the Segway PT
Important warning! Risk of injury!
General:
- When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
- Special care must be taken while handling with electricity.
- When driving on the road, always observe the locally valid laws and regulations!
- Ensure that you wear adequate protective clothing
- If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!
Mounting:
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work.
- PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
- Always read the latest authorized operating and installation instructions before installation
- In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
- To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation
Driving the vehicle:
- Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
- To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
- PT Pro recommends that you always wear a helmet when driving the vehicle.
- When using the vehicle, the current road traffic regulations in the respective country must be observed
- Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
- Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
- Protect batteries and their connectors from moisture
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work
- Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!
Lamps:
- Please always ensure sufficient battery power for the duration of your ride.
- Never look directly into the light source. This can lead to blindness
Rims:
- Important: Risk of crashing:
- Check rims for damage before every ride!
- Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
- Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
- Regularly check the screw connection of the rims!
- Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.
Helmets:
- Caution: Not suitable for motorcycling!
- Please read the warnings inside the helmet!
- Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
- The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
- Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.
Caution:
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.
There are no reviews yet.
