Segway PT battery - rebuilt! New cell block, used housing!
The original Segway PT Li-Ion battery (battery) Saphion Technology 78,2 VDC 6.2 AH, Rev. AJ (Dangerous Goods!). Suitable for all Segway i2 and x2 models, whether Segway Gen2 and SE series.
Suitible for:
Segway Gen2/i2/x2 Segway SE/i2/x2
A Segway PT always needs 2 Accus to drive. Attention should be paid here to a similar power density of the batteries installed on the Segway PT. The weaker of the two batteries limits the range. Thus, a strong new battery can not play its performance when it is combined with a low-performance on a Segway PT. Therefore, we recommend always to replace both batteries on the Segway PT or to determine the performance of the second battery by means of a battery diagnosis. Even older batteries can still achieve excellent values ??with proper care.
It does not always have to be a new battery. If you have a defective battery, PT Pro can often save the defective battery through so-called battery resuscitation or battery repair.
Tips for maintaining your battery on the Segway PT:
- Before the first drive, recharge the battery for 12 hours.
- Always store batteries or Segway PT with installed battery in a dry place!
- Always store batteries or Segway PT with installed battery at temperatures above 10 degrees!
- Always leave the batteries or Segway PT with the Battere installed. The internal charger (UIC) takes care of the optimal battery charge (trickle charge).
Winter use is no problem. Be sure to start the Segway PT above 10 degrees and leave the Segway PT on while traveling in cooler temperatures. Thus, by the waste heat which produces the battery in use, the temperature of the Segway PT can be kept up. After use (even if transported in the car or at a stopover) necessarily dry again and store over 10 degrees. Then your Segway PT also survives exits below 0 degrees.
Reach:
The batteries of the Segway PT are very robust and have a high power density. Important for rechargeable batteries is also that the power is provided permanently and even after many charges. With a charge that requires only about 1 kWh, you can go up to 40 km, so the electricity costs for 100 km at less than 1 € even at the most expensive electricity tariff.
The range is negatively influenced by:
- low outside temperatures cause the battery to "fall asleep"
- increased friction of the tires due to low tire air pressure
- heavy weight of the driver
- uneconomical driving style
- strong gradients
Safety:
- Protect batteries and their connections from moisture
- Only charge batteries with adequately protected sockets and with charging cables designed for this purpose.
- For Segway PT batteries only high-quality cells are installed
- The batteries are high quality processed and built so that no short circuits and thus fires.
Technical specifications:
- 92 LiFePo4 Li-Ion cells
- Charging time: 5 - 8h
- Operating temperatures: -10 ° to 50 ° C
- Temperature when loading 5 ° to 30 ° C
- Capacity (Ah) and voltage: 6.2 Ah, 78.2 V
- Dimensions: 35.7 cm × 19 cm × 8.2 cm
- Performance promise of the manufacturer: approx. 1000 charging cycles
- Warranties: 12 month warranty
- Weight: 5,2 kg
Important warning! Risk of injury!
General:
- When using our products, it is important to follow the instructions for installation and manual and the warnings associated with them.
- Special care must be taken while handling with electricity.
- When driving on the road, always observe the locally valid laws and regulations!
- Ensure that you wear adequate protective clothing
- If the vehicle is damaged, it may not be driven under any circumstances. Danger of injury!
Mounting:
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work.
- PT Pro is generally not liable for damage caused by incorrectly installed attachments, wear and spare parts.
- Always read the latest authorized operating and installation instructions before installation
- In order to avoid damage and malfunctions, installation should only be carried out by qualified personnel! Incorrect mounting can lead to death or serious injury.
- To minimize the risk of injury, please read and follow all instructions and warnings in the user documentation
Driving the vehicle:
- Use of the vehicle can become deadly or result in serious injury due to loss of control, collisions and falls.
- To minimize the risk of injury, read and follow all instructions and warnings in the user documentation.
- PT Pro recommends that you always wear a helmet when driving the vehicle.
- When using the vehicle, the current road traffic regulations in the respective country must be observed
- Always store batteries and accumulators in a dry place and at room temperature (10 - 25 degrees)
- Charge batteries only at adequately fused sockets and with charging cables designed for this purpose
- Protect batteries and their connectors from moisture
- Always switch off your electric vehicle and disconnect the power cable before carrying out maintenance work or replacing parts or accessories.
- Remove both batteries / accumulators before starting work
- Do not clean with steam jet or garden hose or drive through deep puddles! Clean with a damp cloth!
Lamps:
- Please always ensure sufficient battery power for the duration of your ride.
- Never look directly into the light source. This can lead to blindness
Rims:
- Important: Risk of crashing:
- Check rims for damage before every ride!
- Rims with out-of-balance or which show knocks, hairline cracks and deformation must be replaced immediately.
- Hairline cracks are difficult to detect, danger of breaking! Hairline cracks are possible, especially after accidents and after riding fast over high edges (high pavement, thick roots etc.). Here you save at the wrong place!
- Regularly check the screw connection of the rims!
- Never use rims as load securing points (lashing strap!). Lateral tension forces can damage the rim.
Helmets:
- Caution: Not suitable for motorcycling!
- Please read the warnings inside the helmet!
- Only wear the helmet while riding. Danger of strangulation due to getting caught on the chinstrap when climbing or playing.
- The helmet can no longer fulfil its protective function after a fall, so replace it after every fall.
- Materials age due to UV radiation and external influences. To ensure optimum protection, safety helmets should always be replaced after approx. 5 years.
Caution:
Electronic components are generally excluded from return, cancellation and conversion, as these are specific individual productions due to the respective programming of the component or customer-specific optimizations. Complaints can only be accepted if the component was installed by a trained PT Pro technician. In case of self-installation, any form of warranty or guarantee expires. We refer here to § 312g paragraph 2 BGB additionally apply: I. Exclusion already before the beginning of the production of the goods II. Exclusion only in case of considerable economic disadvantages for the entrepreneur.
There are no reviews yet.
